close
Categories
Filter By
Price
Battery Cable Gauge
Flat Coulters
Machine Weight
Maximum Width
Minimum Width
Product Type
Recommended Horsepower
Row Cleaners
Wavy Coulters
Battery Cable Length
Lift Capacity
Volts
Equipment
123 items
22" Wing Ditcher Assembly without Shank
TT-1210B
With adjustments for wing width, wing angle, and point angle, you can easily set your winged ditcher to be as aggressive as you need. The hard-surfaced tillage point is designed to prevent slabbing in clay-type soils, and it’s held in place by two bolts for quick, easy replacement. Adjustable Winged Ditcher for Field Cultivation Specs Ditcher wings are made of sturdy 1/4″ plate with hard surfacing on the leading edges Single clamps are made for 7″ or 7”x 5” bars Minimum width: 7″ Maximum width : 15″ Total length : 16″ Options A kit is available for the BandH Cultivator. This leaves the original BandH shank in place, but allows for mounting of a second shank (1” x 3” – sold separately) behind the original shank.
- $775.00 775.00 USD
Bumper Hoist
BH-1000E
Quik-Lift Bumper Hoist is always there when you need it and never in your way when you don’t. The hoist’s ability to lift up to 1,000 lb. easily turns the work of two or more people into a simple, near-effortless job for one. Thanks to swiveling hydraulic fittings inside the mast, the boom reach can rotate indefinitely—allowing you to complete tasks that other hoists simply can’t do. Hydraulic Bumper Crane With 360° Rotation Power Requirements Included is a heavy, 4-gauge battery cable (25’), which must be connected to a good 12V source (such as battery or contact) before use. Hydraulics The hydraulic system consists of a 12V DC electric/hydraulic pump with a mounted solenoid control valve. (Note: If interference is encountered, this pump can be remotely mounted.) Storage When not in use, the hoist neatly folds down to store inside the bumper. A lockable tool box on the left-hand side of the bumper stores the control switch, power cable, chains, and tools, while a storage compartment in the main frame of the hoist holds your included stabilizer stands. Specs Total product weight: 500 lb. Handles up to 1,000 lb.
- $12,000.00 12000.00 USD
B&H Cultivator Conversion
TT-1047
With adjustments for wing width, wing angle, and point angle, you can easily set your winged ditcher to be as aggressive as you need. The hard-surfaced tillage point is designed to prevent slabbing in clay-type soils, and it’s held in place by two bolts for quick, easy replacement. Adjustable Winged Ditcher for Field Cultivation Specs Ditcher wings are made of sturdy 1/4″ plate with hard surfacing on the leading edges Single clamps are made for 7″ or 7”x 5” bars Minimum width: 7″ Maximum width : 15″ Total length : 16″ Options A kit is available for the BandH Cultivator. This leaves the original BandH shank in place, but allows for mounting of a second shank (1” x 3” – sold separately) behind the original shank.
- $510.00 510.00 USD
Gopher Eliminator without hitch
GE-2100
Our Gopher Eliminator is the last pest-baiting gopher machine you'll ever have to buy. It's durable, powerful, made to withstand the horsepower of larger tractors, and the ideal height to easily hook up to your 3-point hitch (though it works fine on smaller tractors, too). The Gopher Eliminator's flat coulter cuts through the ground, allowing the shank and bait delivery system to create a tunnel that delivers bait to vermin. To finish the job, the rear drive wheel expertly seals the tunnel, ensuring effective pest control with every use of this gopher bait machine. Sight Glass Built-in sight glass on the hopper for easy viewing of bait Cast Point For durability on the ¾" plate shank No-Plug System Bait delivery system is simply designed, so it won't plug up or slow you down Options Two units can be mounted onto longer bars for a multiple-baiting system, allowing you to cover more acres in a day (14' per pass), cut down on compaction, and run both sides at once. Specs Category 2 or Category 3 three-point hookups 24" flat coulter Total product weight: 950 lb. Height from ground to Center Link Pin: 50" Height from ground to Lower 3 Point Pins: 31"
- $5,500.00 5500.00 USD
16" Packer Wheels (Row)
PW-296
- $500.00 500.00 USD
Gauge Wheels for John Deere & Case Planters
PW-348
Not only do our No-Till Gauge Wheels greatly reduce sidewall compaction, they also act as a rotary scraper (scraping outward from the center of the disk)—which allows seed openers and coulters to continue to turn in harsh conditions. The PW-348 Gauge Wheels are just the right fit for John Deere and Case Planters. Schlagel Manufacturing has an inventory of wheel parts to keep your equipment running at peak performance. Note Wheels do include hardware (shown below) to bolt the center hub to outer ring.
- $540.00 540.00 USD