close
Categories
Filter By
Price
Battery Cable Gauge
Flat Coulters
Machine Weight
Maximum Width
Minimum Width
Product Type
Recommended Horsepower
Row Cleaners
Wavy Coulters
Battery Cable Length
Lift Capacity
Volts
Equipment
141 items
12 Row 38" Folding Bar
RT-4034
- $31,000.00 31000.00 USD
12 Row 40" Folding Bar
RT-4035
- $34,000.00 34000.00 USD
4 Row 48" Bar
RT-4036
- $7,000.00 7000.00 USD
HD Trailer Hitch with Easy Hitch
TP-2918
- $7,500.00 7500.00 USD
30" HD Lift Assist
TP-4734A
- $38,750.00 38750.00 USD
30" Wing Ditcher Assembly without Shank
TT-1210
With adjustments for wing width, wing angle, and point angle, you can easily set your winged ditcher to be as aggressive as you need. The hard-surfaced tillage point is designed to prevent slabbing in clay-type soils, and it’s held in place by two bolts for quick, easy replacement. Adjustable Winged Ditcher for Field Cultivation Specs Ditcher wings are made of sturdy 1/4″ plate with hard surfacing on the leading edges Single clamps are made for 7″ or 7”x 5” bars Minimum width: 7″ Maximum width : 15″ Total length : 16″ Options A kit is available for the BandH Cultivator. This leaves the original BandH shank in place, but allows for mounting of a second shank (1” x 3” – sold separately) behind the original shank.
- $975.00 975.00 USD
22" Wing Ditcher Assembly without Shank
TT-1210B
With adjustments for wing width, wing angle, and point angle, you can easily set your winged ditcher to be as aggressive as you need. The hard-surfaced tillage point is designed to prevent slabbing in clay-type soils, and it’s held in place by two bolts for quick, easy replacement. Adjustable Winged Ditcher for Field Cultivation Specs Ditcher wings are made of sturdy 1/4″ plate with hard surfacing on the leading edges Single clamps are made for 7″ or 7”x 5” bars Minimum width: 7″ Maximum width : 15″ Total length : 16″ Options A kit is available for the BandH Cultivator. This leaves the original BandH shank in place, but allows for mounting of a second shank (1” x 3” – sold separately) behind the original shank.
- $775.00 775.00 USD
8 Row 30" Ditcher
TT-5001
With adjustments for wing width, wing angle, and point angle, you can easily set your winged ditcher to be as aggressive as you need. The hard-surfaced tillage point is designed to prevent slabbing in clay-type soils, and it’s held in place by two bolts for quick, easy replacement. Adjustable Winged Ditcher for Field Cultivation Specs Ditcher wings are made of sturdy 1/4″ plate with hard surfacing on the leading edges Single clamps are made for 7″ or 7”x 5” bars Minimum width: 7″ Maximum width : 15″ Total length : 16″ Options A kit is available for the BandH Cultivator. This leaves the original BandH shank in place, but allows for mounting of a second shank (1” x 3” – sold separately) behind the original shank.
- USD
Bumper Hoist
BH-1000E
Quik-Lift Bumper Hoist is always there when you need it and never in your way when you don’t. The hoist’s ability to lift up to 1,000 lb. easily turns the work of two or more people into a simple, near-effortless job for one. Thanks to swiveling hydraulic fittings inside the mast, the boom reach can rotate indefinitely—allowing you to complete tasks that other hoists simply can’t do. Hydraulic Bumper Crane With 360° Rotation Power Requirements Included is a heavy, 4-gauge battery cable (25’), which must be connected to a good 12V source (such as battery or contact) before use. Hydraulics The hydraulic system consists of a 12V DC electric/hydraulic pump with a mounted solenoid control valve. (Note: If interference is encountered, this pump can be remotely mounted.) Storage When not in use, the hoist neatly folds down to store inside the bumper. A lockable tool box on the left-hand side of the bumper stores the control switch, power cable, chains, and tools, while a storage compartment in the main frame of the hoist holds your included stabilizer stands. Specs Total product weight: 500 lb. Handles up to 1,000 lb.
- $12,000.00 12000.00 USD